Payment & Shipping Terms:
|Mateiral:||Fermentation Vessel||Manufacturing Process:||Stainless Steel Materials|
|Surface Treatment:||Electrical Polish,Mirror Polish,Sand Polish ,Aicd Washing,2B||Nominal Pressure:||0.15MPa(tank Body)/ 0.25MPa(jacket)|
Beer Fermentation Vessel / Emulsification Tank SS304 OR SS316 Has 200L To 5000L
Beer Fermentation Tank strictly follow the Article 31, 32 of GMP general rules “Good Manufacturing Practice” (Revised in 2010), and according to the "steel welded normal pressure vessel (with standard definition)" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance.
Beer Fermentation Tank use vertical circular tank body, the top is standard ellipsoidal head , the bottom is 60 ° ~ 90 ° inclination of conical head .It is not only good for wine liquid to bi-directional flow fast fermentation, but also is conducive to discharge yeast and impurity; Tank body and the bottom head is equipped with the jacket and insulation layer.
|Tank Optional Configuration|
|Beer Fermentation Tank optional configuration : thermometer (digital display type or dial), sanitary manhole, in-outlet, CIP universal rotating cleaning ball, sterile sampling valve, pressure gauge, drain valve, level gauge, and liquid level self-control system (bearing module, non-contact ultrasonic, static pressure transmitting device)etc., or configured according to customers' requirements.|
|• Suitable for beer fermentation.|
• There are 200L～5000L varietys of specifications, it can be designed, customized according to the customers' requirements.
• Jacket can put into chilled water (or cooling water), jacket is use dimple jacket; Jacketed outside covered with insulation layer, insulation material is PU (keep cold).
• Connector use fast installation chuck (clamp), inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.
|Design pressure||0.15MPa(tank body)/ 0.25MPa(jacket)|
|Design temperature||100℃(tank body) / 100℃(jacket)|
|In-outlet||Quick-open , flange|
Mechanical polishing, electrolytic polishing,
Sand blasting , pickling
|Polishing precision||Inner wall 0.4μm,outer wall 0.6μm|
|Normal Model And Main Technical Parameters|
|Effective volume :L||200||300||400||500||1000|
|Bottom cone type||60° cone|
|The above-mentioned data is the standard ,for reference only. it can customize according to customer's requirements.|